| * Chemical Nature : |
Anionic. |
| * Chemical Composition : |
Based on naphthalene sulphonate. |
| * Physical Appearance : |
Beige colour powder. |
| * Chemical Compatibility : |
Compatible with anionic &
non-ionic products. Stable under acid & alkaline condition & unaffected
@ high temperature. |
| * 10% soln. pH : 7.0 -
9.0 |
| (D.I. Water = 7.0 used) |
| * % Loss on Drying : 8.0
max |
|
| ( @ 105 °C for 3 hrs.) |
|
| * Solubility : readily
soluble in water. |
| |
| Properties : |
* Tycol - NCI is extremely
low foaming & thus suited for use in flooded jets & overflow machines.
* Tycol - NCI prevents precipitation of dye from leuco vat liquors
as well as promote levelling & retarding action during the process of
dyeing.
* Tycol - NCI is an efficient dispersing agent to use when dyeing
polyster or polyster / cotton goods in batch wise condition.
* Tycol - NCI retards colour build-up on wool while dyeing, wool
/ nylon blends with acid or vat dyes.
* Tycol - NCI reduces staining effect on cellulose & wool while
dyeing their polyester blends with dispersed dyes. |
| |
| Applications : |
* Tycol - NCI is used as
a dispersing agent at a liquor ratios of 10 : 1. The recommended amount
is 05 - 2.0 gms/lt . The same concentration may be employed whenever dyeing
blend of polyester / cellulosic &/or polyester / wool with dispersed
dyes. It also prevent /reduce cross staining of cellulosic or wool with
dispersed dyes..
* Tycol - NCI is recommended to use upto 1.5 - 5 gms/lt in leuco
- vat liquors to prevent dye precipitation & ensure level dyeing . Hence
it gives reserve effects on wool while dyeing wool/nylon blend with acid
or solubilised vat dyes.
* Tycol - NCI is recommended to use upto 8 - 16 gms/lt while dyeing
cellulosics with vat dye stuffs
(by acid-leuco technique). It helps to prevent precipitation of dye stuff
at acid-leuco stage, however this technique is limited to pale shades because
of low dispersibility of vat dye stuff in acid-leuco form.
* Tycol - NCI is recommended to use upto 2.0 - 3.0 % while printing
for the colouration of protein fibres with vat dyes by acid-leuco techniques.
This is also used at the time of final print paste added to alkaline leuco
vat before converting it into the acid-leuco vat compound.
Storage : Stable under normal conditions. |
